How to Use a Darning Foot


If you have never come across the contraption known as the darning foot, it can look a little odd when compared to the normal presser foot. It can even seem awkward at first to learn how to use a darning foot. However, it is an essential tool for free-motion quilters and fabric artisans to use when sewing decorative creations with thread. While the quilter moves the fabric, the darning foot keeps the fabric from coming up with the needle. With a little practice, your darning foot can become an invaluable tool.

Remove your current presser foot from your sewing machine, and attach the darning foot as you would any foot. Darning feet look different, depending on the manufacturer, but most will maintain a "C" or "O" shape using either metal or clear plastic at their bases.

Drop the feed dogs, or use a cover plate on your machine if feed dogs are not available. If this is not possible, adjust the stitch length of your machine to zero or as low as your machine will allow.

Slide your fabric or quilt sandwich into place below the darning foot. Lower the lever of the darning foot, and hold onto the upper thread with one hand.

Take one complete stitch, and pull up the upper thread to bring the bobbin thread to the surface. Take multiple stitches in the same place to secure the threads.

Run the machine as you free-motion sew or quilt your fabric piece, using your fingers to move the fabric instead of the feed dogs, until your stitching is complete. Replace the darning foot with your preferred presser foot when finished.

 

Free Motion Darning Embroidery Foot

Grit™ Darning Embroidery Foot

Visit our SHOP for AMAZING ITEMS AVAILABLE!
ONLY FOR THE FIRST 500 READER
Use the coupon code SEWEASY15 at checkout to get 15% off all orders! 
Only for the first 500! 

 

 


Leave a comment